Genie GR-26J, Operator'S Manual, Page: 26 / 59

Operator's Manual
Fourth Edition • First Printing
Controls
24 GR-26J Part No. 1307950GT
1 Mast up/down button
Push and hold the mast up/down button to
select the mast up/down function.
2 Turntable rotate left/right button
Push and hold the turntable rotate left/right
button to select the turntable rotate left/right
function.
3 Machine not level indicator light
The machine not level indicator light will come
on when the tilt alarm sounds.
4 Platform overload indicator light
Light on indicates platform is overloaded and
no functions will operate.
Remove weight from the platform to resume
machine operation or have a person on the
ground turn the key switch to ground control
and proceed to lower the platform.
Note: An alarm will sound at the platform when
an overload condition occurs and will stop
sounding when weight is removed from the
platform.
5 Battery charge indicator
Shows battery charge level. If battery charge
indicator shows two bars, charge the batteries.
6 Key switch for platform/off/ground selection
Turn the key switch to the platform position
and the platform controls will operate. Turn the
key switch to the off position and the machine
will be off. Turn the key switch to the ground
position and the ground controls will operate.
7 Jib boom up/down button
Push and hold the jib boom up/down button to
select the jib boom up/down function.
8 Function enable button for mast up, jib boom
up and turntable rotate left functions
Press and hold this function enable button to
enable the mast up, jib boom up and turntable
rotate left functions
9 Function enable button for mast down, jib
boom down and turntable rotate right functions
Press and hold this function enable button to
enable the mast down, jib boom down and
turntable rotate right functions