Genie GR-26J, Operator'S Manual

Page: 34 / 59

Operator's Manual
Fourth Edition • First Printing
Inspections
32 GR-26J Part No. 1307950GT
32 Move the control handle in the direction
indicated by the yellow arrow.
Result: The mast should lower. The descent
alarm should sound when the mast is
lowering.
33 Press and hold the function enable switch on
the control handle.
34 Move the control handle to the left.
Result: The turntable should rotate to the left.
35 Press and hold the function enable switch on
the control handle.
36 Move the control handle to the right.
Result: The turntable should rotate to the right.
Test the Steering
37 Press the drive function button.
Result: The indicator light above the function
button should be on.
38 Press and hold the function enable switch on
the control handle.
39 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue triangle on the control panel.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
40 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
yellow triangle, on the control panel.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.
Test Drive and Braking
41 Press the drive function button.
Result: The indicator light above the function
button should be on.
42 Press and hold the function enable switch on
the control handle.
43 Slowly move the control handle in the direction
indicated by the blue arrow on the control
panel until the machine begins to move, then
return the control handle to the center position.
Result: The machine should move in the
direction that the blue arrow points on the
drive chassis, then come to an abrupt stop.
44 Slowly move the control handle in the direction
indicated by the yellow arrow on the control
panel until the machine begins to move, then
return the control handle to the center position.
Result: The machine should move in the
direction that the yellow arrow points on the
drive chassis, then come to an abrupt stop.
Note: The brakes must be able to hold the
machine on any slope it is able to climb.