Service Manual
September 2016
Repair Procedures
30
Genie Lift
Part No. 115417
Section 4
Repair Pr ocedures
Observe and Obey:
Repair procedures shall be completed by a
person trained and qualified on the repair of
this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
Be sure that all necessary tools and parts are
available and ready for use.
Use only Genie approved replacement parts.
Read each procedure completely and adhere
to the instructions. Attempting shortcuts may
produce hazardous conditions.
Machine Configuration:
Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
•
Machine parked on a firm, level surface
•
Carriage in the stowed position
•
Casters locked
•
Red Emergency Stop button in the off
position (if equipped)
•
Brake locked (if equipped)
•
All external AC power supply disconnected
from the machine (models with electric
winch)
About This Section
Most of the procedures in this section should only
be performed by trained service professional in a
suitably equipped workshop. Select the appropriate
repair procedure after troubleshooting the problem.
Perform disassembly procedures to the point
where repairs can be completed. Then to
re-assemble, perform the disassembly steps in
reverse order.
Symbols Legend
Safety alert symbol—used to alert
personnel to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous
situation which, if not avoided,
could result in death or serious
injury.
Indicates a potentially hazardous
situation which, if not avoided,
may cause minor or moderate
injury.
Indicates a potentially hazardous
situation which, if not avoided,
may result in property damage.
Indicates that a specific result is expected
after performing a series of steps.
Indicates that an incorrect result has occurred
after performing a series of steps.
Summary of Contents for Genie Lift
Page 15: ...September 2016 Service Manual Part No 115417 Genie Lift 15 This page intentionally left blank ...
Page 17: ...September 2016 Service Manual Part No 115417 Genie Lift 17 This page intentionally left blank ...
Page 19: ...September 2016 Service Manual Part No 115417 Genie Lift 19 This page intentionally left blank ...
Page 45: ......