Genie GEBVAF Series, User Manual

Page: 9 / 13

6
Product Installation
6.1 Note
1) Make sure the unit is powered off before installation.
2) Check power supply voltage consistent with the electric
voltage to prevent voltage unworthy, resulting in damage to
the device.
3) Do not use in the environment beyond the boundaries of the
temperature, and maintain good ventilation to prevent the rain
in order to reduce the risk of fire or electric shock.
4) The installation and maintenance of this product should be
professional, please do not in any way to remove or modify the
equipment; can only use the required accessories of
manufacturers. Problems caused by unauthorized repair are at
your own risk.
6.2 Installation Tools and Information
Prepare the required engineering data and instructions. Before
installation please prepare the following tools and
instrumentation: A straight or a Phillips-head screwdriver,
multi-meter, scissors, needle nose pliers, tape measure, pencil
and so on.
6.3 Installation Method
1. Check the equipment whether it is damaged.
2. Mounting bracket or base.
①
If the cement wall, install the expansion screws (expansion
screw holes need stand or bas
e hole), and then mount
- 7 -