Genie GEBVAF Series, User Manual

Page: 3 / 13

- 1 -
1
Notes
Read this manual carefully before use.
1)To reduce the risk of electric shock, do not open the machine and
maintain by yourself, please consult a professional service person.
2)To prevent fire or shock hazard, use the power after safety
certification, the input voltage, current, voltage polarity and
operating temperature must meet the requirements of this camera.
3)Please note the operating temperature and environmental
requirements of the camera, avoid too low or too high temperature.
General operating temperature range of -10
℃ ～
+50
℃
(Fahrenheit
temperature is 14
℉ ～
122
℉
). Avoid flooding and rain, minimize dust
and moisture erosion, otherwise camera would be damaged.
4)Cameras in use should avoid direct sunlight, glare, otherwise the
sensor will be damaged.
5)Do not touch the sensor surface, if any foreign objects exits, a
cotton swab or lens paper can be used to wipe, if it is difficult to
remove, a neutral detergent diluted with water would be useful. Do
not use corrosive solution.
7)In order to make the camera work smoothly and obtain a
satisfactory image, the power cord and video connection can not be
too long, otherwise the increase of line loss will lead to the
inadequate magnitude of the operating voltage of the camera or
video signal Inadequate.
8)In order to prevent the camera from falling, please do not place
the camera on an unstable bracket, base or other unstable objects.
Otherwise it will lead to injury, at the same time, the camera will be
damaged.
9)The camera cannot be placed near the radiator or heating resistor.