63
7-5-4. Device
Select
Device
to set device settings of the EZPZ NVR.
•
ALARM OUT:
Set the Sensor, Motion, and Video Loss - for triggering the alarm relay.
HDD Error and Video Loss can also be set for triggering a beeping sound.
The following settings can be changed to trigger an Alarm Output.
o
ALARM DURATION:
Set alarm dwell time from 5 to 60 seconds.
•
CONTROLLER:
Set the controller speed, type and ID.
•
CHANNEL:
o
AUDIO SOURCE:
Select IP CAM Audio or Local Audio
•
KEYTONE
: Sets Key Tone On or Off.
•
REMOTE CONTROLLER ID
: Sets an ID number on the supplied remote control for its
identification.
•
SENSOR:
Select the type of each Sensor.
•
IEEE 802.3af PSE STATUS:
a table showing the status of all POE devices connected to the NVR.