Genie CCTV AVRCD-6351, Instruction Manual

Page: 17 / 19

Problem
The Motion Detection
function does not
work.
Colour is not correct.
• Check that MOTION DET in the SPECIAL SETUP
is not set to 'OFF'.
• Check the WHITE BAL settings in the SETUP menu.
The screen flickers
continually.
• Check that the camera isn't facing toward a bright
light source, such as the sun.
RS-485
communication fails.
• Check the polarity between the RS-485 Control
Port and the RS-485 cable.
• Check the RS-485 Communication settings.
Solution
RS-485 Control Port 485 Control Board Connection Port
485+ (+) CONNECTION TERMINAL (TRX+)
(-) CONNECTION TERMINAL (TRX-)
485-
Specifications
■
33
Ultra High Resolution Digital Day/Night Vandal Resistant Dome Camera
32
Ultra High Resolution Digital Day/Night Vandal Resistant Dome Camera
■
Troubleshooting
※
OPTION - Dual Voltage : AVRCD-6351DV
ITEM
Image Sensor
Total Pixels
Effective Pixels
Scanning System
Synchronization
Frequency
SONY 1/3" Super HAD High Sensitivity Colour CCD
811(H) x 508(V) 795(H) x 596(V)
768(H) x 494(V) 752(H) x 582(V)
2:1 Interlace
INT
Horizontal : 15.734 KHz, Vertical:59.94 Hz Horizontal : 15.625 KHz, Vertical:50.00 Hz
600TV lines
52dB (AGC Off, Weight ON)
NTSC PAL
Power Consumption
H.Resolution
S/N
Min. Illumination
White Balance
Shutter Speed
Sens-up
Gain Control
DNR
Motion Detection
Privacy Function
V-REV
H-REV
Sharpness
Day & Night
DIS
Digital Zoom
0.15Lux (40 IRE)
ATW / AWC / MANUAL(1700
˚
K ~11,000
˚
K) / INDOOR / OUTDOOR
1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec
AUTO / OFF (Selectable x2 ~ x512)
LOW / HIGH / OFF
ON / OFF (1~32 Level)
ON / OFF (8 Zone, ALARM Output)
ON / OFF (12 Zones)
ON / OFF
ON / OFF
ON/OFF (Level Adjustable)
AUTO / COLOUR / B/W / EXTERN
ON / OFF
ON / OFF (x16)
-10
˚
C to + 50
˚
C / 30% to 80% RH
-20
˚
C to + 60
˚
C / 20% to 90% RH
IP66
Appro. 1,100g
Operating temperature / Humidity
Storing Temperature / Humidity
Weatherproof
Weight
AC24V / DC12V DC12V AC24V / DC12V DC12V
170mA(AC24V)/250mA(DC12V) 160mA 170mA(AC24V)/250mA(DC12V) 160mA