31
Ultra High Resolution Digital Day/Night Vandal Resistant Dome Camera
30
Ultra High Resolution Digital Day/Night Vandal Resistant Dome Camera
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
• Check the power connections.
• Check the VIDEO signal line connection.
• Make sure the lens is clean. Clean the lens with
a soft clean lint free cloth.
• Adjust the monitor contrast & brightness controls.
• Re-position the camera if necessary.
The image on the
screen is dark.
• Adjust the contrast control of the monitor.
• If you have an intermediate device, set the 75
Ω
/
Hi-z properly.
The camera is not working
properly, and the surface
of the camera is hot.
• Check that an appropriate power source is
connected to the camera.
The DAY/NIGHT menu
does not work.
• Check that AGC in the EXPOSURE menu is set
to 'OFF'.
The SENS-UP function
does not work.
• Check that AGC in the EXPOSURE menu is not
set to 'OFF'.
• Check that SHUTTER in the EXPOSURE menu
is not set to 'A.FLK' or 'MANUAL'.
Solution
EXIT
●
LANGUAGE
: You can select the menu language according to your
requirements.
●
RETURN
: Select this to save the SPECIAL menu settings and return
to the MAIN SETUP menu.
Select a desired EXIT mode using the Left and Right buttons depending on
the camera purpose.
- SAVE : Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET : Resets the camera settings to the factory defaults. Language and
Monitor settings are not initialized.
■
How to Use the Camera
Troubleshooting
■
Summary of Contents for AVRCD-6351
Page 18: ... MEMO ...
