In intelligent mode, the humidifier can automatically control the mist volume
and stop/resume humidification.
NOTE:
Hard Water and White Dust
High mineral content in your water, also known as hard water, may cause a white
mineral residue to accumulate on surfaces in the room near the humidifier. This
mineral residue is commonly referred to as white dust. The higher the mineral
content (hardness) of your water, the greater the potential that an ultrasonic humidifi-
er may produce white dust. White dust is not a result of a defect or flaw in the humidi-
fier. It is a result of the amount of minerals suspended in the water you are using.
Operation or indication
Light ring is red and blinking
Light ring goes off
The color of water tank light
Light ring is red and blinking
Operation or indication
If it blinks twice, this indicates the level of
water in the tank is too low. Make sure the
water tank is filled with water and installed in
the base. Then restart the humidifier.
If it blinks 3 times, it means water shortage
protection has occurred. Unplug the humidifi-
er, add water into the water tank and then
reconnect the power.
If it blinks 4 times, it means the product can
humidify the air but cannot control the humidi-
fication output. Please contact our customer
service center.
Light ring will go off if there is no operation in
40 seconds. Any kind of operation can wake it
up.
The water tank light will change its color
according to ambient humidity. In case of
lower humidity the tank light will illuminate
orange. In medium humidity the tank will
illuminate purple. In high humidity the tank will
illuminate blue.
- 7 -
USING YOUR HUMIDIFIER
Summary of Contents for G-1011-4LW
Page 15: ......
