Wipe disassembled components with a warm wet towel. To prevent damage to
the humidifier, never rinse the humidifier base directly under water. After clean-
ing, reassemble the components in reverse order. Be sure that the water cover
subassembly is installed in its correct position.
Add a small amount of vinegar of 5-10 drops of cleaning solution into the water
tank. Then fill 1/4 of the water tank with water. Leave it for 5-10 min and then
use a brush to clean the water tank.
To clean the float plate, remove the plate by sliding it toward the back of the
humidifier base. Reinstall it once it is cleaned.
If the water channel has any water deposits, wipe it with a soft cloth dampened
with water.
Clean the fragrance box with water and then leave it to dry.
Put the dry fragrance sponge back into the box then replace it with a fragrance
box.
Follow the cleaning instructions when the humidifier will not be used for at least one
week, or at the end of the season. At the end of the season, remove any accesso-
ries and discard. Allow the humidifier and all components to dry completely before
storing.
DO NOT
store humidifier with water inside the Reservoir or Water Tank. Pack unit
safely and store in cool, dry location.
Cleaning method for water channel:
Cleaning the fragrance box:
End of Season Cleaning and Storage
- 9 -
CLEANING YOUR HUMIDIFIER
5.
6.
1.
1.
2.
2.
Summary of Contents for G-1011-4LW
Page 15: ......
