GENI DM4 DigiMaster, User Manual

Page: 4 / 13

4
DM4 Dipswitch Settings
Set dipswitches 1 and 2 on the back of the DM4 according to how you wish the sliders and
joystick to control the fixture. The table below shows the combinations available.
Dip2 Dip1 20x 4-
channel
Description 4x 12-
channel Description
OFF OFF 1,2,X,Y Slider 1 controls CH-1
Slider 2 controls CH-2
Joystick left/right
controls PAN
Joystick up/down
controls TILT X,Y,1,2,3,4,
5,6,7,8,9,10 Page1
Slider 1 controls PAN
Slider 2 controls TILT
Page2
Slider 1 controls CH-3
Slider 2 controls CH-4
Page3
Slider 1 controls CH-5
Slider 2 controls CH-6
etc.
OFF ON X,Y,1,2 Slider 1 controls PAN
Slider 2 controls TILT
Joystick left/right
controls CH-1
Joystick up/down
controls CH-2 1,2,3,4,5,6,
7,8,9,10,X,Y Page1
Slider 1 controls CH-1
Slider 2 controls CH-2
Page2
Slider 1 controls CH-3
Slider 2 controls CH-4
etc.
Joystick left/right
controls PAN
Joystick up/down
controls TILT
ON OFF 1,X,Y,2 Slider 1 controls CH-1
Slider 2 controls PAN
Joystick left/right
controls TILT
Joystick up/down
controls CH-2 X,Y,1,2,3,4,
5,6,7,8,9,10 Same as for setting
Dip2 and Dip1 both
OFF.
ON ON X,1,Y,2 Slider 1 controls PAN
Slider 2 controls CH-1
Joystick left/right
controls TILT
Joystick up/down
controls CH-2 1,2,3,4,5,6,
7,8,9,10,X,Y Same as for setting
Dip2 OFF and Dip1 ON.
Set the other dipswitches according to the mode you have selected, as shown below.
Dip3 Dip4 Dip 5 Dip 6
Reserved Reserved OFF – joystick is
in jumping mode.
ON – joystick is
in linear mode. ON – 4x
12-channel
OFF – 20x
4-channel
IMPORTANT – YOU RISK LOSING OR CORRUPTING PROGRAMMED SCENES IF YOU
SWITCH BETWEEN MODES DURING PROGRAMMING STAGES.
Now you have set up your fixtures. It is time to make a light show.