If you feel any resistance when sliding the
GMC up, or the shutter does not feel like it is
retracting, make sure the GMC is flush against
the FTU and the slots (as highlighted in the
illustrations below) on the GMC and FTU line
up.
Finish
1. Connect the GMC LAN port to the
residential gateway
2. Connect the supplied power adapter to
the GMC and plug it into a power outlet.
The device will power on immediately.
The GMC-TK01-P2110 is now correctly
installed.
Position on FTU
Position the GMC on the FTU.
1. The patch cover must lie flat against the
FTU.
2. Slide the cover in the direction of the
arrow until the tab at the top of the FTU
clicks fully into place in the slot of the
GMC.
