Safety and Care
Operating Conditions
• Do not operate the device in temperatures below 0° C or above 40° C.
Safe Operation
• Never look directly into the end of a fiber optical cable.
Warning:
The GMC is a Class 1 laser product.
• Use only the supplied power adaptor and make sure the adaptor is rated for use with
the power supply.
• Indoor use only.
• Never expose to or immerse in water.
• Do not block the air vents (the device will overheat).
Repair and Service
• Do not open the housing. There are no user serviceable parts inside.
• Please contact your service provider if the device stops operating as expected.
Care
• Always unplug your GMC from the power supply before cleaning!
• If needed, the GMC can be cleaned by wiping it over using a soft, dry cloth. Avoid any abrasive
material that might scratch or damage the surface.
• To remove accumulated dirt, a damp cloth may be used.
• Make sure no moisture or liquid enters the GMC. This will cause permanent damage and will
prevent the device from operating.
• Product logos and LED icons will be damaged by the use of strong cleaning products or ethanol
based solutions.
