SY-SIX-RDM2-DIN-485 | Synergis IX DIN Rail 2 Door Expander | Installation Manual
Last Updated September 2018
24
Relay Indicators
The Relay indicators will show the status of the lock output relay.
State
Description
Constantly on (red)
Relay output is ON
Constantly off
Relay output is OFF
Reader 1/Reader 2 Indicators
The Reader 1 and Reader 2 indicators display the status of the data being received.
State
Description
Short Flash (red)
A short
FLASH
(<250 Milliseconds) on the Reader 1/Reader 2
indicators will show that data was received but was not in the correct
format.
Long Flash (red)
A long
FLASH
(>1 Second) indicates that the Reader Expander has
read the data and the format was correct.
Zone (Input) Indicators
Whenever an input on the Reader Expander is programmed with an input type and area, the zone status will
be displayed on the front panel indicator (1-8) corresponding to the physical input number (Z1-Z8). This allows
for easy test verification of inputs without the need to view the inputs from the keypad or the Synergis
software.
State
Description
Constantly off
Input is not programmed
Constantly on (red)
Input is in an OPEN state
Constantly on (green)
Input is in a CLOSED state
Continuous flash (red)
Input is in a TAMPER state
Continuous flash (green)
Input is in a SHORT state
