tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016
1
1
AutoVu SharpX mobile installation
This section includes the following topics:
•
"Hardware components for SharpX mobile installation"
on page 2
•
"Hardware components for SharpX mobile installation with external Navigator box"
page 5
•
"Preparing to install SharpX mobile hardware "
on page 7
•
"Installing SharpX mobile hardware"
on page 9
•
"Connecting SharpX systems in a test environment"
on page 10
•
"About mounting the LPR Processing Unit"
on page 11
•
on page 14
•
"About mounting the SharpX camera for a mobile installation"
on page 18
•
"Installing the SharpX using the hardmount bracket"
on page 19
•
"Installing the SharpX using the magmount"
on page 24
•
"Camera cabling do's and dont's"
on page 26
•
"Drilling the camera cable holes"
on page 27
•
"Selecting the camera ports for the LPR Processing Unit "
on page 28
•
"Securing wires using tension clamp connectors"
on page 31
•
"Connecting SharpX cameras for a mobile installation"
on page 33
•
"About installing wheel imaging cameras in a mobile AutoVu system"
on page 43
•
"About AutoVu satellite hardware"
on page 51
•
"Guidelines for installing the in-vehicle computer"
on page 64
•
"Alignment scenarios for Sharp and SharpX cameras"
on page 65
•
"Overview of aligning SharpX cameras"
on page 67
•
"Sealing the camera cable holes "
on page 71
•
"Completing the SharpX mobile installation"
on page 72
