Genetec AutoVu SharpX Mobile, Hardware Manual

Page: 11 / 109

AutoVu SharpX mobile installation
tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016 5
Hardware components for SharpX mobile installation with
external Navigator box
A SharpX mobile installation is comprised of many hardware components. Before installing these
components, it is recommended to familiarize yourself with the hardware components used in a
typical installation.
If you are installing an X1S or X2S SharpX system where the LPR Processing Unit does not include
the AutoVu Navigation Option, you can include an external Navigator box in the installation. If your
LPR Processing Unit includes the AutoVu Navigation Option, see Hardware components for SharpX
mobile installation on page 2.
Component What you should know
A SharpX
cameras
SharpX cameras can be attached to the vehicle using a hardmount or
magmout. For more information, see About mounting the SharpX camera for a
mobile installation on page 18.
B LPR
Processing
Unit
This is the main processing component of the SharpX system. The LPR
Processing Unit is sometimes referred to as the “trunk unit” because it is
typically installed in a vehicle's trunk. For more information, see About
mounting the LPR Processing Unit on page 11.
C Tire/Aux
Imaging
Adapter
Module
If the installation includes wheel imaging cameras that require a BNC
connection, you will need to install the Tire/Aux Imaging Adapter Module. For
more information, see Connecting a wheel imaging camera on a SharpX system
on page 48.