AutoVu SharpX mobile installation
tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016
7
Preparing to install SharpX mobile hardware
There are many aspects to an AutoVu hardware installation. Before installing the hardware,
familiarize yourself with the relevant documentation and make sure that you have all of the required
components.
What you should know
For software installation and configuration instructions, refer to the
Sharp Administrator Guide
and
Patroller Administrator Guide
.
WARNING
:
Only AutoVu-certified personnel should setup and install AutoVu systems. Read all of
the procedures in this guide before installing an AutoVu fixed or mobile system. Failure to follow the
supplied instructions or information may result in loss of data or damage to hardware and will void
warranty.
To prepare for SharpX mobile hardware installation:
1 Read the
AutoVu SharpOS Release Notes
, available on the
2 Read deployment documentation (
Deployment Questionnaire
and
Scope of Work
) from your initial
site evaluation.
Consult your vehicle’s owner manual if you have any questions about your vehicle’s wiring or
operation.
3 Inspect the vehicle before beginning the installation, checking its functionality (lights, engine
light, etc.) and verifying that it is in good working condition.
4 Ensure that you have all of the
for the installation.
5 Inspect all the AutoVu components delivered to site for the installation. Ensure that there are no
missing or defective components.
If any components are missing, please notify your Genetec representative within 30 days.
After you finish
Install SharpX mobile hardware
.
Required tools and parts for a SharpX mobile installation
Before installing SharpX mobile hardware, make sure that you have the tools and parts required to
successfully complete the installation process.
There are a number of additional required tools and parts that are not included with the AutoVu
installation kit.
•
AutoVu Alignment Kit (AU-K-ALIGNKIT):
Includes several tools that are required for AutoVu
installations.
•
Depth-controlled cable jacket stripper:
Recommended for stripping the cable jacket to avoid
damage to the internal conductors. The Cyclops stripping tool is included with the AutoVu
Alignment Kit.
•
RJ45 crimp tool:
Use a professional quality tool for proper crimping. The EZ-RJPRO
®
HD Crimp
Tool is included with the AutoVu Alignment Kit.
