Genesys GDR- COM Series, Installation Manual, Page: 8 / 62

GDR-XXXX NAV/COM INSTALLATION MANUAL
CHAPTER 1 – INTRODUCTION
64-000109 Page 8 of 62
2. SCOPE
This manual includes installation and checkout procedures for the GDR.
Chapter 1:
Provides an introduction to the GDR.
Chapter 2: Includes system installation instructions.
Chapter 3: Includes unit drawings , both mechanical and electrical.
Chapter 4: Includes ground maintenance procedures.
Chapter 5: Includes ground functional test procedures.
Chapter 6: Includes troubleshooting procedures.
Appendix A: Includes ARINC 429 specifications.
3. STYLE AND DEFINITION
Stylistic elements used throughout this manual are listed in Table 1. These styles are
used to emphasize text, to make the information more accessible during installation and to
make the online manual more interactive.
Table 1: Installation Guide Style Conventions
Style Description Uses
Steps
Numbered steps that together form
a set of instructions for installing a
specific GDR. The numbered steps provide guidance
through the proper sequence of
installation procedures.
Checklists Installation procedures with
checkboxes beside them. All the
procedures in the checklist must be
performed, but do not need to be
performed in a specific order. The checklist will help track the
installation progress. Place a check
mark on the PASS or FAIL line after
completion of each procedure.
NOTE: Capitalized underlined text followed
by a colon. The note format is used to highlight and
further explain certain installation and
operation details
CAUTION:
Bold, capitalized underlined text
followed by a colon. This warning format is used to flag
important installation considerations.
Failure to heed the information in the
warnings could cause bodily harm or
death.
WARNING:
Bold, capitalized underlined text
followed by a colon. This caution format is used to flag
important installation considerations.
Failure to heed the information in the
warnings could cause damage to the
aircraft or damage to the product.
4. SPECIAL CONSIDERATIONS
WARNING:
A. Changes or modifications to the equipment not expressly approved by the Genesys
Aerosystem could void the user's authority to operate the equipment.
B. It is the responsibility of the operator of this equipment to obtain any necessary
FCC licenses for transmitting with this equipment and transmit only on authorized
channels.