Genesis nG1, Instruction Manual

Page: 9 / 32

N o s e T i p s
N o s e A s s e m b l i e s
9
I M P O R T A N T
Nose assemblies do NOT include nose tips. Nose tips must be ordered separately.
A tool (except part number 71203-00039) must always be fitted with the correct nose assembly and nose tip for your fastener but if you wish to
order a nose assembly or a nose tip separately, refer to the ‘NOSE TIPS’ table below and on pages 10 and 12.
If your application presents no access restriction use a Type ‘1’ Nose Tip.
Dimensions ‘A’ and ‘B’ below will help you assess the suitability of a particular nose tip.
You should also check that the dimensions of the nose casing will not restrict access to your application. If access is restricted Type ‘2’ Nose Tips
are available for some fasteners. Refer to the table on page 12.
It is essential that nose assembly and nose tip are compatible with the fastener prior to operating the tool. If you have ordered a 71203-00039
complete tool, it is important that you check that the nose tip already fitted to the nose assembly is the correct one to place your fastener by sliding
the fastener stem into the nose tip. No force should be required and play should be minimal.
Swivel heads are available as an alternative to nose assemblies when further reach is required. See pages 14-16 in the ‘Accessories’ section.
1
In inches then in millimetres.
2
Head forming nose tips for use with countersunk heads
ONLY.
TYPE 1
NOSE TIPS
F ASTENER
MATERIAL Ø
1
NOSE TIP (mm)
see
below
PART Nº 'A' 'B' NAME
Al Alloy
Steel
Al Alloy
Al Alloy
Al Alloy
Al Alloy
Al Alloy
Stainless Steel
Steel
Any
Any
Steel
Stainless Steel
Any
Any 1/8
1/8
1/8
–
5/32
5/32
5/32
1/8
1/8
1/8
5/32
1/8
1/8
1/8
3/32
4.8
3.3
2.9
4.8
3.3
3.3
3.3
3.3
3.3
4.8
3.3
3.3
3.3
4.8
3.3 12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7 71210-05002
71210-16070
07340-06401
2
71210-05002
71210-16070
07340-06501
2
71210-16070
71210-16070
71210-16070
71210-05002
71210-16070
71210-16070
71210-16070
71210-05002
71200-16051
3.2
3.2
3.2
3.0
4.0
4.0
4.0
3.2
3.2
3.2
4.0
3.2
3.2
3.2
2.4 AVEX
®
BULBEX ®
AVINOX
®
II
AVIBULB ®
AVDEL
®
SR
STAVEX
®
Q RIVET
N RIVET
…039*
…039*
…003
…039*
…039*
…009
…039*
…039*
…039*
…039*
…039*
…039*
…039*
…039*
…033
A
B
* Complete tool part number 71203-00039 does
not only include the 71203-15000 nose assembly
below but also the followin g two nose tips:
71210-0500 2 and 71210-1607 0 making up a
nose assembly kit part number 71203-15100. Use
the nose tip listed in the table.
Note:
Alternative spring 07498-04301 should be fitted if
stem jammin g occure s when installin g small
diameter fasteners.
* Items 3-11 availabl e as cartridg e assembl y
71203-20320
COMPLETE TOOL
PART NUMBER :
precede with 71203-00.
* See top left
NOSE ASSEMBLY
part nº 71203-15000
(+ 2nose tips above = 71203-15100)
ITEM DESCRIPTION PART Nº
1 TAPERED NOSE CASING 71213-00350
2 'O' RING 07003-00067
3 JAW HOUSING TAPERED 71210-15902*
4 JAWS 71200-15001*
5 JAW SPREADER 07498-04502*
6 BUFFER 71210-05001*
7 (See Note: ) SPRING 07500-00418*
8 LOCKING RING 07340-00327*
9 JAW SPREADER HOUSING 'T' 71210-20321*
10
DETENT SLEEVE 71210-20322*
11 'O' RING 07003-00277*
1
2 3 4 5 6 7 10 11 9 8