7
English
KNOWING YOUr SOLDErING IrON
UNPACKING AND CONTENT
IMPOrTANT
:
Due to modern mass production techniques, it is unlikely the product
is faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
:
Description
QTY
Description
QTY
Soldering Iron
1
Battery Pack (GLAB08B)
1
Charging Stand
1
Charging Adaptor
1
Iron Holder
1
Iron Holder Base
1
Solder Wire
1
Chisel Tip
1
Tip Cleaning Sponge
1
Operator's Manual
1
OPErATION
WArNING:
To reduce the risk of serious personal injuries, read and follow all
important safety warning and instructions before using this tool.
WArNING:
Always be sure that the tool is switched off before insertion or
removal of the battery pack.
INSTALLING OR REMOVING THE BATTERY PACK
(FIG 2)
• To install the battery pack, insert the battery pack (5) from the bottom of the
tool all the way until it locks in place with a click, as shown in FIG 2.
• To remove the battery pack, slide the battery locking tab (4) to the left as
shown in FIG 2, to release the battery pack, then pull the battery pack out.
1
2
4
5
3
6
7
10
12
11
8
9
FIG 1
1.
On/Off Switch
2.
On/Off LeD Indictor
3.
Fine Point Tip
4.
Battery Locking Tab
5.
Battery Pack
6.
Solder Wire
7.
Chisel Tip
8.
Charging Adaptor
9.
Charging Stand
10.
Iron Holder Base
11.
Iron Holder
12.
Tip Cleaning Sponge
FIG 2
4
5
