Genesis GenWatch3 GW RSP25, Book

Page: 15 / 30

15
600- 2.16.15 -EE.1
o
Mill TCP/IP: When selected, the connection will
automatically use the next available XTL Series Digital
Transceiver connected to the machine via USB. Each packet
received is then echoed via TCP/IP on the specified
Port .
•
Port Number *: When using Serial or TCP/IP input, defines
which COM port to use for this connection.
•
Host Name / IP *: For TCP/IP connections, the network computer name or
IP address of the computer set up as a GW_RSP25 TCP/IP server. For
Topaz connections, the network computer name or IP address of the
Topaz-enabled radio.
•
Port *: For Topaz connections, this is the port used to connect to the
Topaz-enabled radio. For TCP/IP connections, this is the port of the CAI
data source. For TCP/IP + Serial
and Mill Serial, this is the
forwarding TCP/IP port on the local machine for all data received.
•
Redundancy Position : For Millennium connections, this allows the
configuration of multiple connections per site for redundancy. The values
can be assigned arbitrarily but must be unique per site.
The port range available for selection is the default dynamic range, therefore the ports at the
start of the range might be in use by other applications.
•
Start Connection : If checked, then the GW_RSP25 module will start this
connection when the connection is updated. If you want to retain the
settings for a connection but do not want to receive packets from the
connection, uncheck this option. In most cases, this option should be
checked.
•
APX Modem: For Millennium and Mill Serial connection types,
this indicates that this connection will use a Motorola APX series radio.