7-53
07
Blade type fuse
Before inspecting a fuse, you should
turn OFF the engine as well as the
other electric system switches. If a fuse
is blown out, remove the blown-out
fuse and install a new fuse of the same
capacity by using the fuse puller, which
is prepared inside the fuse box in the
engine compartment. A new fuse may
be prepared along with the fuse puller.
However, if not, you may temporarily
select/use a fuse of the other systems,
which do not affect the vehicle opera-
tion, such as the audio system.
Cartridge type fuse
Before inspecting a fuse, you should
turn OFF the engine as well as the
other electric system switches. If a
fuse is blown out, remove the blown-
out fuse and install a new fuse of the
same capacity.
Pay extreme caution not to damage
the blown-out fuse while removing it.
Inner panel fuse replacement
1. Turn the Engine Start/Stop button
and all other switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight
out. Use the removal tool provided
in the engine compartment fuse
panel.
4. Check the removed fuse; replace it
if it is blown.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, we recommend that
you consult an authorized retailer of
Genesis Branded products.
OHI076028
OHI076029
OHI076022
OHI076023
