2-14
Safety system of your vehicle
Rear seats
To prevent damage to the seats:
• Always stop adjusting the seats
when the seat has been adjusted
as far forward or rearward as
possible.
• Do not adjust the seats longer
than necessary when the engine
is turned off. This may result in
unnecessary drain of the bat-
tery.
• Do not operate two or more
seats at the same time. This may
result in an electrical malfunc-
tion.
Seat sliding, seatback angle and
seat cushion tilt adjustment
Vehicles not equipped with shoulder
adjustment
• Seat sliding
Push the control switch (1) forward or
rearward to slide the seat to the
desired position. Release the switch
once the seat reaches the desired
position. The seatback angle is adjust-
ed automatically along with the seat
sliding position.
• Seatback angle
Push the control switch (2) forward or
rearward to move the seatback angle
to the desired position.
Release the switch once the seat
reaches the desired position. The seat
sliding position is adjusted automati-
cally along with the seatback angle.
NOTICE
• NEVER adjust the rear power
seats when a child restraint is
installed in that seat.
• NEVER allow children in the
car unattended. The power
seats are operable when the
engine is turned off.
WARNING
To prevent injury:
• Do not adjust your seat while
wearing your seat belt. Moving
the seat cushion forward may
cause strong pressure on your
abdomen.
• Do not allow your hands or
fingers to get caught in the
seat mechanisms while the
seat is moving.
WARNING
OHI036072
OHI036079
■
Type A
■
Type B
