background image

This manual is to be used by authorised personnel involved in installing,
commissioning and servicing Genesis instant, double freshbrew and espresso (B2C)
table top beverage vending machines. The technical information contained within this
document is for information only and may be changed without prior notice. Crane
Merchandising Systems accepts no responsibility for any damage caused to the
machine through misinterpretation or misuse of the information contained in this
document.

Upon receipt, carefully examine the machine checking for any damage or
missing/incorrect parts. Any discrepancy must be reported to Crane Merchandising
Systems in writing within three working days.

In accordance with the food hygiene regulations and in compliance with local Public
Health Authorities, it is the responsibility of the operator to keep the machine in a
thoroughly clean condition.

The following symbol is used throughout this Technical Manual:

Safety First! Take care, risk of personal injury.

SureVend™ is a trade mark of Crane Merchandising Systems

Crane Merchandising Systems (CMS) accepts no responsibility for damage caused to the equipment

through misinterpretation or misuse of the information contained in this manual.

©

Copyright 2007 Crane Merchandising Systems

Summary of Contents for B2C/Teapot



















































































































































































































Reviews: