Genesis 11c EFORCE 2.0, User Manual

Page: 59 / 65

59
SERVICE
Safety information
WARNING!
Risk of injury due to improperly performed maintenance work!
Improper maintenance of the equipment can cause serious injury or
material damage.
Therefore, make absolutely sure to:
» Only let qualified personnel carry out maintenance work.
» Make sure the installation site is organized and clean! Loose com-
ponents and tools lying around are sources of danger.
» Wear protective gloves for all work!
CARE AND MAINTENANCE
PREVENTATIVE MAINTENANCE
Genesis recommends that all hydraulic rescue tools be serviced by a certified factory
technician at a frequency of once every 12 months. Just like a vehicle this crucial
maintenace ensures the tool functions at top performance and safety. Your sales
representative can answer any question you may have.
We recommend only quailified personnel carry out maintenance.
GENESIS PREVENTATIVE MAINTENANCE PROGRAM
The following are recommended service intervals for Genesis tools.
Each Use
-Equipment should be wiped down to remove debris
-Clean cutter blades
-check cutter blades for damage
-Check Spreader Tips and arms for damage
-Check Vario Tips and arms for damage
-Lubricate blades, pins and toggles with WD40 or equivilent
Weekly Inspections and Maintenance
-Run each tool and build pressure
-Check handles and guards, tighten if necessary
-Torque centerbolt on cutters