4-
3. How To Set The Unit
3.1 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected,
press the
ENTER
button to setup or it will automatically return to the main functions without
any change after idling 8 seconds. To go back to the functions without any change press the
MENU
button. The main functions are showing below:
DMX 512 Address Setting
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address.
Once the address has been selected, press the
ENTER
button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the
MENU
button again.
5-
Show Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(show 1)
or
(show 2) or
(show 3) or
(show 4) mode. Once the mode has
been selected, press the
ENTER
button to setup or automatically return to the main
functions without any change after 8 seconds. To go back to the functions without any
change press the
MENU
button again.
Show 1 mode - Fixture is placed on the floor. Tilt movement angle 210°.
Show 2 mode - Fixture is fixed under ceiling. Tilt movement angle 90°.
Show 3 mode - Fixture is placed on the speaker, The spot is always projecting
to the audience’s direction; i.e in front of the stage. Pan movement angel (left to right to
left): 160°. Tilt movement angel: 90° (60° above horizon; 30° below horizon.)
Show 4 mode - Fixture is fixed under ceiling. The spot is mainly projecting in
front of the stage. Pan movement angel (left to right to left):160°. Tilt movement angel:
90° (vertically, front 75°; back 15°)
Slave Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal) or
(2 light show) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the
MENU
button
again.
Sound Mode
Press the
MENU
button until the
is showing on the display. Pressing
ENTER
button
and the display will blink. Use
DOWN
and
UP
button to select the
(sound on) or
(sound off) mode. Once the mode has been selected, press the
ENTER
button to
setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the
MENU
button again.
Blackout Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
