32
33
Setting
s
5.9 Setting Battery Capacity
Menu: Settings
Submenu:
Battery capacity
Softkey
OK..
.
Select:
Automatic or
700 mAh or
1200 mAh (
+
/
-
)
Softkey
YES
Optimum charging of a battery depends
on the detection of the battery capacity.
The handset attempts to calculate this
capacity as quickly as possible using the
data acquired from use. The program-
ming described below serves to narrow
down the range of possible capacities
and to shorten the learning phase.
There is a choice of three settings:
Auto-
matic
,
700 mAh
and
1200 mAh
. If the
battery type you are using does not have
one of the two available capacities, select
the next highest or "Automatic.” The
battery will not be damaged, even if the
setting is incorrect.
5.10 Selecting Base Station / Log in
5.10.1 Selecting Base Station
Menu: Base select
Softkey
OK…
Select Base A (
+
/
-
)
Softkey
YES
You can operate your handset on up to
four different base stations (A to D). To
do this it must first be registered on the
base station to be used. With the setting
"Automatic search” the handset registers
itself on the next available base station.
In most cases this will be the right one,
except if you are using the handset in
the radio coverage of several base sta-
tions, on which the handset is registered.
Then a selective search must be made.
5.10.2 Log in Handsets
Base station
Before starting the handset registration
procedure, you must make the base sta-
tion ready for registration; see Chapter
5.7.1 for details.
Handset
Menu: Login
Select base station (
+
/
-
)
Softkey
OK...
Enter code no.
Softkey
LOG IN
The base station usually should be selec-
ted manually.
The code no. will be displayed on the sys-
tem manager’s handset once you have
made the base station ready for registra-
tion.
5.11 Automatic End of Call
Menu: Settings
Submenu:
Automatic call end
Softkey
ON
.
If "Automatic call end” is activated, your
handset will switch off automatically
after the other party has terminated the
connection.
5.7.6.1 Specifying the Trunk Code
Menu: Settings
Submenu: Configuration
Menu item:
Trunk Code edit
Softkey
OK...
Display e.g. "0”
Softkey
EDIT…
5.7.6.2 Trunk Code Transmission
Menu: Settings
Submenu: Configuration
Menu item: Trunk Code edit
Select
OPTION...
Trunk Code transmitting
Softkey
ON
or
OFF
If your Genery ISDN is connected to a
PABX, it needs to know, wether the PABX
sends the caller identification number
including the trunk code in front of it. If
not so, the Genery ISDN has to insert the
trunk code (exchange code), in order to
be able to dial public exchange numbers
from the call list properly.
5.7.7 Specifying Call Charge Factor
Menu: Settings
Submenu: Configuration
Menu item:
Charge factor
Softkey
OK…
Display (e.g.): Charge factor xxx
Softkey
EDIT…
Enter new charge factor
Softkey
SAVE
If the reception of charge units is availa-
ble to your ISDN access, you can enter
the factor for converting this information
into amounts of money. Using the soft-
key
OPTION…
you can change the cur-
rency to Euro.
5.7.8 Call Forwarding using Keypad
Menu: Settings
Submenu: Configuration
Menu item:
CF with keypad
Softkey
ON
or
OFF
If your extension is designed to control
call transfer using the keypad protocol,
you can set your system this way.
5.7.9 Remote Servicing
Menu: Settings
Submenu: Configuration
Menu item:
Remote service
Softkey
ON
or
OFF
You can specify whether or not remote
servicing (dial-in for troubleshooting /
configuration) is possible for your device.
5.8 Entering a Name
Menu: Settings
Submenu:
Name enter
Softkey
OK...
Enter name (details of entering
see "Phonebook / Save new entry”)
You can enter a name displayed in stand-
by mode. A name which has already been
entered can be edited with this menu
item.
