Generic XOR 50 ccm, Service Manual

Page: 48 / 110

48
z
Install the dowel pins
z
install the new gaskets( and )
z
apply GENERIC bond no. 1215 to the clutch
cover as shown in the illustration.
GENERIC bond no. 1215
NOTE: Install the kick starter lever as
shown in the illustration.
Tightening toque
：
8-12Nm
(0.8-1.2kg-m, 6.0-8.5Ib-ft)
PISTON
z
install the piston rings on the piston.
The first and the second ring: keystone ring.
NOTE
:
Position the ring so that the marking is on
upside.
z
it is extremely important that, when the
piston is fed into the cylinder, each ring in
place should be so positioned as to hug
the locating pin as shown in illustration.