flashing. The display will show the image of the pairing camera. If there
is no connection for 10 seconds, the code mode will be automatically
exited.
(2) Press
to return to the main menu, press the camera switch button
to change to pairing camera.
(Note: one camera just can be connected to one display, but one
display can be connected to two camera at the same time)
3. Camera Using
3.1 Installation
(1) Place the camera in a convenient position so that it can aimed at the
area you want to monitor.
(2) Adjust the angle of the baby device by turning the camera up, down,
left or right until a satisfactory image is obtained on the handheld
device.
3.2 Intercom Mode
When you speaking of the camera ,the handheld display should be able to
hear the speech sound. If not ,you can short press the
or
button to
increase or reduce the volume(The step please read the 4.2 Volume
Adjustment)
3.3 Night Vision Mode
The camera equipped with 8 high-intensity infrared LED lights that capture
clear images in the dark. When the built-in optical sensor detects that the
ambient light is weak, the infrared LED will automatically light up, the
screen of the handheld device will be show on black and white color, and
the
icon will be displayed in the status bar at the top of the screen.
4. Handheld Display Menu
4.1 Intercom Mode
When the handheld display needs to enter the intercom mode, you need
to press
key and hold the key, then you can start the conversation.
Release the
key when the speech is finished. After released
key of the display, the system will automatically enters the camera
intercom mode.
4.2 Volume Adjustment
