4.7 Temperature Display
(1) Press
button
，
it will pop up the menu bar.
(2) Press the
or
button until
is highlighted, and click
to
confirm.
(3) In the pop-up menu bar, press the
button or
button to select
or
as the temperature unit and press the
key to confirm.
To return to the previous step, press the
key.
The screen status bar will display the temperature , reading from the
temperature sensor on the back of the camera.
If the temperature is above 28 ℃ or below 20℃, the temperature
reading will turn red.
4.8 Camera Display Selection
(1) Press
button
，
it will pop up the menu bar.
(2) Press the
button or the
button, to select
camera1 ,
camera2 or
switch and press the
button to confirm viewing.
(3) The display can be switched to view different lenses at the same time,
you can switched the lenses between
and
in
mode.
(4) You also can press the
button to quickly select
,
or
switch mode to watch.
4.9
VOX Setting
VOX detection: Turn on the VOX mode, after 30 seconds, the screen will
turn off. When the ambient volume of the baby is louder than the set
value, the display will light up the display.
(1) Press
button
，
it will pop up the menu bar.
(2) Press the
or
button until
is highlighted, and click
to
confirm.
(3) Select
modes to turn on VOX, or select
to
turn off VOX.
(4) In the VOX off mode ,short press the
button ,you can quickly enter
the VOX mode (The quick access VOX mode will only turn off the
display, but will retain the camera's music transmission)
Note: When the VOX is turned off, press the
power button and the
display screen will turn off. You can hear the sound from the camera at
