11
En
gl
is
h
Types of GENERGY CAMLOCK connectors available
TYPE
A
TYPE
B
TYPE
C
TYPE
D
TYPE
E
TYPE
F
MALE CAMLOCK
FEMALE THREAD
FEMALE CAMLOCK
MALE THREAD
FEMALE CAMLOCK
HOSE
FEMALE CAMLOCK
FEMALE THREAD
MALE CAMLOCK
HOSE
MALE CAMLOCK
MALE THREAD
References of available CAMLOCK connectors by diameter and type
Diameter
TYPE
A
TYPE
B
TYPE
C
TYPE
D
TYPE
E
TYPE
F
1”
2015200
2015210
2015220
2015230
2015240
2015250
1-1/4”
2015201
2015211
2015221
2015231
2015241
2015251
1.1/2”
2015202
2015212
2015222
2015232
2015242
2015252
2”
2015203
2015213
2015223
2015233
2015243
2015253
3”
2015204
2015214
2015224
2015234
2015244
2015254
4”
2015205
2015215
2015225
2015235
2015245
2015255
5.5 Using foot valve (not included).
The time required to complete the aspiration and the pump starts expelling water
depends on the depth at which it aspires. If it aspires water at the pump level, the
pump will pump water immediately. But if we are at 4 or 5m aspiration time will be
much longer reaching 2 minutes or more depending on the model. Remember that
the pump body must be filled with water at all times!
When aspirated into deep (a meter or more) we recommend the use of a foot valve.
This remains installed at the tip of the aspiration hose replacing the aspiration filter.
The foot valve only allows circulating water in an upward direction, not allowing the
water back.
Advantages:
•
After using the motor pump its body and the hose will remain filled with water
because the foot valve will not allow the water back.
