●
Use the
UNIT
button to increase the
INT
value or the
STORE/ENTER
button to decrement it.
The default value of
INT
is 15 seconds. It is also the minimum possible value. The maximum
possible value is 24 hours. The terms
S
,
M
and
H
on the line above the
INT
value stand for
seconds, minutes and hours, respectively. If you press and hold the
UNIT
or
STORE/ENTER
button, you can ramp up or down quickly to any possible value. The seconds, minutes and
hours indicators will automatically change as you ramp up and down.
●
When you have finished changing the value of
INT
, press the
LOG/SET
button to save your
setting.
●
Complete the process by pressing the
HOLD
button to return to displaying real-time
readings.
To change the value of the data logging time length setting TML:
●
Press the
LOG/SET
button to enter viewing and setting mode.
●
Move the
▼
mode selector over
TML
.
●
Press the
LOG/SET
button again. This will cause the two digits on the secondary display to
flash.
●
Use the
UNIT
button to increment the
TML
value or the
STORE/ENTER
button to decrement it.
The default value of
TML
is 15 minutes. The minimum possible value is 1 minute, and the
maximum possible value is 30 days. It’s important to understand that the value of
TML
must
be greater than that of
INT
. The terms
D, H
and
M
on the line above the
TML
value stand for
days, hours and minutes, respectively. If you press and hold the
UNIT
or
STORE/ENTER
button, you can ramp up or down quickly to any possible value. The days, hours and minutes
indicators will automatically change as you ramp up and down.
●
When you have finished changing the value of
TML
, press the
LOG/SET
button to save your
setting.
●
Complete the process by pressing the
HOLD
button to return to displaying real-time
readings.
CLEARING DATA LOGS
To clear all stored data logs:
●
Press the
LOG/SET
button to enter viewing and setting mode.
●
Move the
▼
mode selector over
CLR
(see screen shot at
right).
●
Press and hold the
ZERO
button for at least 2 seconds. The screen below left will appear
briefly, followed by the screen
below right. All stored data logs
will be erased and the number of
the
JOB
working group will be
reset to
01
.
14
Summary of Contents for RHMG700DL
Page 20: ...20...