GENERAL PUMP
1174 Northland Drive • Mendota Heights, MN 55120
Phone: 651.686.2199 • Fax: 800.535.1745 • e-mail: [email protected] • www.generalpump.com
Ref 300929 Rev. B
05-20
GENERAL PUMP
A member of the Interpump Group
RA2
Industrial Unloader
INSTRUCTIONS FOR USE (CONT.)
The valve should be mounted on the pressure line in
any position (horizontal or vertical) which will allow easy
access to the pressure adjusting screw. For proper oper-
ation the by-pass line internal diameter should be at least
1.25” at the narrowest point, and should not be connected
directly to the pump inlet line (see below for correct instal-
lation).