Document #: GP-UM-POD-001-13
Page 3 of 8
Section 1. Specifications:
Physical Features:
Dimensions
1.45”
(L)
×
0.80” (W)
×
0.58” (H) for
optical module
125 mm (L)
×
50 mm (W) for preamplifier
board
Input
Fiber
Single
mode
SMF-28
or
compatible
Output
Fiber
PM
fiber or single mode fiber
Fiber
Connector
FC/PC,
FC/APC, SC/PC, or SC/APC
Number of Electrical Connection Pins
10-pin without preamplifier
20-pin
with
preamplifier
Optical Characteristics:
Insertion Loss
0.8 dB typical, 1.2 dB max.(@1550 nm)
Return
Loss
55
dB
PDL
0.25
dB
max.
PMD
0.1
ps
max.
Input Optical Power Sensitivity
5
µ
W
Max. Input Optical Power
5 mW
Analog Dynamic Range
30 dB
Analog
Bandwidth
1.5
MHz
Operation Wavelengths
1
1550 +/- 50 nm, 1310 +/- 50 nm
Wavelength Dependent Loss (WDL)
0.15 dB (across C-band)
SOP Accuracy at Calibration Wavelengths
2
1% max.
DOP Accuracy at Calibration Wavelengths
2
+/-2% max.
Operation Temperature
0° to 40 °C
Storage Temperature
-40 °C to 85 °C
Damage
Power 300
mW
min.
Electrical Characteristics:
Power
Supply
+/-
12
volts/0.2
A
Maximum
Voltage
+/-
15
volts
Output
Connector
10-pin
without
preamplifier
20-pin
with
preamplifier
Note:
1.
Calibration matrices are provided for C-band operation around 1550 nm. Contact
General Photonics if the intended operation wavelength is outside C-band.
2.
Measurement is against Agilent 8509C polarization analyzer.
