General Music WK4, Owner'S Manual, Page: 146 / 376

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6•34 User Guide
SAVE ALL
Use «Save All» to save an entire set of file types
contained in RAM in a single step. This proce-
dure allows you to save:
•
up to 16 Songs (All Song);
• 16 Groups of Ram-Sounds and RAM -
Sounds (All Sound);
• 8 Groups of Performances (All Real Perform-
ance);
• 12 Groups of Rom Style Performances (All
Style Performances;
• 4 Groups of User Styles (All User Style).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Warning: Use “Save ALL” with care as this
procedure overwrites all data at the destination.
Be absolutely sure, therefore, of the file content in
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
disk before using the “Save ALL” procedures.
The example refers to the Save All Song proce-
dure. Use the same steps for other Save All op-
erations.
1. Select ALL SONG from the main Save page then
press ENTER to gain access to the FILE SELEC-
TOR.
2. Select the destination device (Floppy or Hard
disk).
Press soft button F1 to select the Floppy disk.
Press soft button F2 to select the Hard disk.
3. Select the destination Block in the disk directory.
If necessary, select an empty location to cre-
ate a new Block using the method already
discussed in the General Save procedure.
4. Press ENTER twice to start the saving procedure.
3/4
ENTER TEMP
ESCAPE
F2
F1
F2
F1
2
1
ENTER TEMP
ESCAPE