37
5. Basic operation
Switch on
Press the switch-on/off key to start the
mobile phone, then the screen will display
switch-on image. Then you can enter Settings
menu to set phone modes, including SIM1 &
SIM2 On, Only SIM1 On, Only SIM2 On and
Flight. The defaulted one is Only SIM1 On.
After insert SIM card, the mobile phone will
automatically check the SIM card availability,
and then it will be shown information as
following on the display by sequence:
1. “Input phone password”——If you have set
the password.
2.
“Input PIN” —— If you set SIM card
password.
3. “No service”—Indicates fail to make register
and cannot make any calls.
Summary of Contents for DST500
