GENERAL MOBILE DST500 User Manual Download Page 46

Page: 46 / 151

send and receive chain text messages, which

may affect the message fees. For more

information, please consult the service provider.

When the SMS capacity is full, there will be

an SMS icon flickering on the standby interface.

The full capacity can affect SMS reception.

Delete some SMS to solve the problem.

If the other party has received SMS, you

will hear the alert sound from the mobile phone

(if such alert function is set as ON)

Note: When sending SMS via the SMS network,
the mobile phone may display “Message sent”.

It indicates that the SMS has been sent to the

SMS center inbox set in the mobile phone but

does not mean the receiver has received the

SMS. For more information, please consult the

service provider.

Summary of Contents for DST500
























































































































































Search results

Summary of Contents for DST500

Reviews:

Related manuals for DST500

Brands by name

Popular brands

GENERAL MOBILE DST500, User Manual

Search results

Summary of Contents for DST500

Reviews:

Related manuals for DST500

Brands by name

Popular brands