SQUARING THE FENCE
Occasionally the aluminum fence will have to be squared with the mounting surface and
adjusted parallel to each
2. The wing screw (C) should be tightened to hold the aluminum fence (B) securely.
. The fence should now make contact with the jointed edge and
square with the table.
CHANGING CUTTERS
All spindle sizes are equipped with a safety lock nut, Left-
h
a
n
d
t
h
r
e
a
d
s
are found above the large spindle nut. (Fig.7) To mount
or change
cutter, first remove the safety lock nut.
:
Remove the spindle nut by placing one wrench on the
spindle nut and another wrench on the flats on top of the
spindle. Safety lock nut must be replaced before starting
work operations.
TABLE INSERT
The second table insert has a guide shoulder of
Ø
3-1/2",
this table Insert is used for copying.
:
ASSEMBLING AND INSTALLING SHAPER FENCE
The fence can be assembled using the diagram (pg.22) as
a guide. Fence installation: Once assembled, place the
fence on the table. Lock it in place using the two-lock
handles (A) and two-lock levers (B). (Fig.9)
(
SPINDLE
SAFETY LOCK NUT
SPINDLE NUT
SPACER
FIG.6
FIG.7
FIG.8
FIG.9
A
B
Summary of Contents for 40-350
Page 17: ...BASE...