Carefully unpack and remove the planer and its compo-
nents from the box and check for damaged or missing
items as per the list of contents below.
NOTE: Please report any damaged or missing items to
your General International distributor immediately.
LIST OF CONTENTS
QTY
A-
PLANER...........................................................................1
B-
ADJUSTMENT HANDLE ...................................................1
C-
DUST CHUTE ...................................................................1
D-
SAFETY KEY.....................................................................1
E-
CAP SCREW ...................................................................1
F-
BUTTON HEAD SCREW ...................................................4
G-
T-HANDLE WRENCH .......................................................1
H-
4 MM ALLEN KEY ...........................................................1
UNPACKING
A
B
8
D
E
F
G
H
C
ASSEMBLY INSTRUCTIONS
BEFORE STARTING THE INSTALLATION AND ASSEMBLY, MAKE SURE THAT THE POWER SWITCH IS IN THE “OFF” POSITION
AND THAT THE POWER CORD IS UNPLUGGED. DO NOT PLUG IN OR TURN ON THE PLANER UNTIL YOU HAVE COMPLE-
TED THE INSTALLATION AND ASSEMBLY STEPS DESCRIBED IN THIS SECTION OF THE MANUAL.
For your convenience this planer is shipped from the factory partially assembled and requires only minimal assem-
bly and set up before being put into service.
The unit should be installed on a flat, level, sturdy and
stable surface, able to support the weight of the
machine and the workpiece with ease.
Never install or operate the planer over the edge of a
table, workbench or other mounting surface.
