TURN THE SWITCH TO THE "OFF" POSITION AND
UNPLUG THE UNIT FROM THE POWER SOURCE
BEFORE EMPTYING OR REPLACING THE COLLECTOR
BAG OR BEFORE PERFORMING ANY MAINTENANCE.
EMPTYING THE COLLECTOR BAG & DRUM
Note: Depending on your needs, shop situation and local reg-
ulations collections bags can be emptied and re-used or dis-
posed (with their contents) and replaced with a new bag.
1.
Turn off and unplug the machine.
2.
Unclip the bag clamp
A
and remove the bag
B
from
the machine, or unclip the drum lid
C
and roll the
drum
D
out from beneath the machine.
3.
Empty the drum and/or the bag (or simply dispose of
the bag and it's contents and replace with a new
bag) disposing of the contents in a safe and respon-
sible manner that complies with all local codes and
regulations regarding waste disposal.
4.
Re-install the drum and/or a bag and re-attach the
clamp.
4” x 50’ Polyethylene
Flexible Hose
#10-130
5” x 50’ Polyethylene
Flexible Hose
#10-135
Clear Plastic
Collector Bag
#10-819
Hose Clamps 4”
#10-089
Hose Clamps 5”
#10-090
Dust Collector Accessory
Kit Two Machine Hook-Up
#10-200
(2) 4” x 10’ Polyethylene flexible hose.
(1) 4” Universal dust hood outlet.
(1) Table saw dust hood.
(2) 4” blast gates
(1) 4”“Y” fitting.
(10)4” wire bail hose clamps.
(6) Heavy duty clear plastic col-
lector bags.
Electronic Earmuffs
#99-200
Highly efficient noise
reduction to help protect
your hearing when
operating power tools.
1 Micron Canister Filter
#10-806
RECOMMENDED OPTIONAL ACCESSORIES
We offer a large variety of products to help you increase convenience, productivity, accuracy and safety when
using your Dust Collector. Here’s a small sampling of optional accessories available from your local General
International dealer.
For more information about our products, please visit our website at www.general.ca
20
B
C
D
A
Summary of Contents for 10-800CF M1
Page 24: ...WIRING DIAGRAM 24...
Page 25: ...25 Notes...
