background image

Introduction and Safety

Owner’s Manual for Generac PWRCell Inverter

1

Section 1: Introduction and Safety

Introduction

Thank you for purchasing a Generac PWRcell™ product.

The  PWRcell  inverter  is  a  storage-ready  inverter  that

connects to PV Link™ optimizers and PWRcell batteries

to form the PWRcell system.
This  owner’s  manual  provides  instructions  for

programming, 

configuring, 

registering 

and

commissioning  the  PWRcell  Inverter.  See  the  Generac

PWRcell  Inverter  Installation  Manual  for  installation

instructions.
The  information  in  this  manual  is  accurate  based  on

products produced at the time of publication. The manu

-

facturer  reserves  the  right  to  make  technical  updates,

corrections,  and  product  revisions  at  any  time  without

notice.

Read This Manual Thoroughly

If any section of this manual is not understood, contact

the  nearest  Independent  Authorized  Service  Dealer

(IASD) or Generac Customer Service at 1-888-436-3722

(1-888-GENERAC), or visit 

www.generac.com

 for assis

-

tance. The owner is responsible for correct maintenance

and safe use of the unit.
This  manual must be used  in conjunction with all other

supporting  product  documentation  supplied  with  the

product.
SAVE THESE INSTRUCTIONS for future reference. This

manual contains important instructions that must be fol

-

lowed during placement, operation, and maintenance of

the unit and its components. Always supply this manual

to any individual that will use this unit, and instruct them

on  how  to  correctly  start,  operate,  and  stop  the  unit  in

case  of  emergency.  The  contents  of  this  manual  are

applicable to PWRcell Inverters operating with software

version > 13120. 

NOTE: 

Verify  the  latest  software  version  is  installed  to

ensure the most up to date features and functionality are

available. See  the  Inverter Installation Manual for more

information on verifying the inverter software version. To

get the latest software version go to 

www.generac.com/

pwrcell/update

 and follow the instructions, or call 1-855-

395-7841 for additional help or questions.

Safety Rules

The  manufacturer  cannot  anticipate  every  possible  cir

-

cumstance that might involve a hazard. The alerts in this

manual, and on tags and decals affixed to the unit, are

not all  inclusive.  If using  a procedure,  work  method,  or

operating technique that the manufacturer does not spe

-

cifically recommend, verify that it is safe for others and

does not render the equipment unsafe.
Throughout  this  publication,  and  on  tags  and  decals

affixed to the unit, DANGER, WARNING, CAUTION, and

NOTE  blocks  are  used  to  alert  personnel  to  special

instructions  about  a  particular  operation  that  may  be

hazardous if performed incorrectly or carelessly. Observe

them carefully. Alert definitions are as follows:

NOTE: 

Notes contain additional information important to

a procedure and will be found within the regular text of

this manual.
These  safety  alerts  cannot  eliminate  the  hazards  that

they indicate. Common sense and strict compliance with

the  special  instructions  while  performing  the  action  or

service are essential to preventing accidents.

How to Obtain Service

For assistance, contact the nearest Independent Autho

-

rized Service Dealer (IASD) or Generac Customer Ser

-

vice  at  1-888-436-3722  (1-888-GENERAC),  or  visit

www.generac.com

When contacting an IASD or Generac Customer Service,

always supply the complete model and serial number of

the unit as  given  on  its  data  decal  located on the  unit.

Record the model and serial numbers in the spaces pro

-

vided on the front cover of this manual.

(000100a)

Consult Manual. Read and understand manual
completely before using product. Failure to 
completely understand manual and product 
could result in death or serious injury.

WARNING

(000001)

DANGER

Indicates a hazardous situation which, if not avoided, 
will result in death or serious injury.

(000002)

WARNING

Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.

(000003)

CAUTION

Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.

Summary of Contents for PWRcell APKE00014

























Reviews: