Generac Portable Products 1,700 PSI Pressure Washer
5
Read this entire owner’s manual before you attempt
to assemble or operate your new pressure washer.
REMOVE PRESSURE
WASHER FROM
CARTON
• Remove parts box included with pressure washer.
• Slice two corners at guide handle end of carton from top
to bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.
CARTON CONTENTS
Items in the carton include:
•
Main Unit
•
Parts Box (which includes the following):
•
Wireform
•
Safety goggles
•
One bottle engine oil
•
Nozzle cleaning kit
•
Owner’s manual
•
Engine manual
•
Spray gun
•
Nozzle extension
•
High pressure hose
•
Handle
•
Utility brush
•
Accessory adapter
•
O–Ring maintenance kit
•
Owner’s registration card
•
Parts bag, which contains:
2 Carriage bolts
2 Knobs
If any of the above parts are missing or damaged, call the
pressure washer helpline at 1–800–270–1408.
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-270-1408.
To prepare your pressure washer for operation, you
will need to perform these tasks:
• Attach the handle and the wire form to store high
pressure hose and spray gun.
• Add oil to engine crankcase.
• Add fuel to fuel tank.
• Connect high pressure hose to the spray gun and the
pump and connect water supply to the pump.
Attach the Handle
• Place the top of the handle onto the bottom of the
handle already connected to the main unit making sure
the holes in the top align with the holes on the bottom
(Figure 1).
• Insert carriage bolts through the holes and attach the
plastic knobs. Tighten the knobs by hand (Figure 2).
Make sure the
holes on the top
of the handle are
aligned with the
holes in the
bottom of the
handle
Figure 1 — Attach Handle to Handle Supports on the Unit’s
Base
