Generac Portable Products 1467-0 Owner'S Manual Download Page 4

Generac Portable Products 1,700 PSI Pressure Washer

4

Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust pressure
of spray and spray pattern.

Air Cleaner — Dry type filter element limits the amount
of dirt and dust that gets in the engine.

Automatic Cool Down System — Cycles water
through pump when water reaches 140°-145°F. Warm
water will discharge from pump onto ground. This
system prevents internal pump damage.

Gas Tank — Fill tank with regular unleaded gasoline.

High Pressure Hose — Connect one end to water pump
and the other end to spray gun.

High Pressure Outlet — Connection for high pressure
hose.

Nozzle Extension — Attach to spray gun to use
adjustable nozzle.

Primer Bulb — Prepares a cold engine for starting.

Pump — Develops high water pressure.

Recoil Starter — Used for starting the engine manually.

Safety Goggles — Always use the enclosed goggles or
other eye protection when running your pressure washer.

Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.

Water Inlet — Connection for garden hose.

Spray Gun

Adjustable Nozzle

Nozzle Extension

High Pressure Hose

Safety Goggles

Air Cleaner

Primer Bulb

Gas Tank

Water Inlet

Pump equipped with 

Automatic Cool Down

System

Recoil Starter

High Pressure Outlet

KNOW YOUR PRESSURE WASHER

Read this owner’s manual and safety rules before operating your pressure washer. 
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.

Summary of Contents for 1467-0





















Reviews: