Generac Portable Products 1295-0, Owner'S Manual

Page: 7 / 24

7
Generac Portable Products 3200PSI High Pressure Washer
Attach Handle to the Pressure
Washer
Use either a 13mm wrench or adjustable wrench to
attach the handle to the pressure washer.
To attach handle to the pressure washer
(Figure 1):
• Slowly tip the pressure washer forward and let it
gently rest on the front bumper.
• Align the holes on the handle with the holes on the
base.
• Insert the carriage bolts provided to hold the handle
in place.
• Secure handle to the pressure washer using the
four provided flange nuts.
• Slowly tip the pressure washer back in place and
insert the multi–colored nozzles in the spaces
provided in the handle.
Install Oil Dipstick on Pump
WARNING!
You must remove the shipping
cap located on the pump and install the oil
dipstick. Failure to do so will void your
warranty and damage the pump.
To install the oil dipstick:
• Make sure your unit is on a level surface.
• Remove the shipping cap located on the pump.
• Install the oil dipstick.
Figure 1 — Attach Handle to Pressure Washer
Figure 2 — Install Oil Dipstick onto the Pump
Shipping Cap
Oil Dipstick
Remove shipping cap and
install oil dipstick here.