Gen
B
ody Inc.
Page
26
/
28
9.2 System Characteristics
System Characteristics
Operating Time
More than 500 continuous measurements when battery
is fully charged.
Stand-by time (Power
Off)
More than 30 days when battery is fully charged
Charging Time
About 7 hours when battery is fully discharged
Measurement Time
About 15 seconds
Measurement Mode
Only Incubation Mode
- Qualitative analysis are available for 2 or 3 bands.
- Incubation time is automatically set up by RFID Tag.
Item Quantity
Max 10
Lot Information Quantity
of each item
Max 20
- When 20 lot information data are saved, 1st stored
information is automatically deleted
Capacity of measurement
data
Max 1000 test
- When 950 tests are saved, backup warning is
displayed.
Data Search
Search is only available through “Data Management
Tool(PC)”
Data Transmission
Data transmission is available through “Data
Management Tool(PC)”
Data Backup
Measurement data is not deleted even after backup.
- Additional Backup SW function is supported by "Data
Management Tool (PC)".
Print is available by "Data Management Tool (PC)“ or
External Thermal Printer.
It cannot be printed directly from the device.
LIS/HIS
It can be implemented by requirement (HL7 protocol)
- It is supported by "Data Management Tool (PC)“ only.