MP3 Node
Hardware Installation and User Guide
9000-0000-127 Revision 01
19 of 21
Genave Electronics
Installing & Use
Mounting the MP3 Node
To remove the node from a Din rail, use a screw driver to pull and hold down on the red latch
on the enclosure while pulling the bottom of the case forward.
Power Connection
The MP3 Node operates from 7.5VDC to 28 VDC. The power input is also reverse voltage
protected. The polarity of the connections is displayed on the label.
Microphone Port
The Microphone Port is used to create MP3 files for storage on the SD card as well as a
store-and-forward PA function. Use only Genave 8032-0000-004 microphones. The
microphone is biased with a 5 Volt supply.
