MP3 Node
Hardware Installation and User Guide
9000-0000-127 Revision 01
11 of 21
Genave Electronics
Inputs
This determines what type of input will start and stop the
channel.
DISABLED:
The input does not perform any actions.
TRIGGER:
The input activates the audio when it is turned on.
The input may remain active or be turned off at any time, but
the audio will have been started and will run to its completion.
HOLD DN:
The audio runs as long as the input is turned on. It
will stop when the input is turned off or when the audio has
run to its completion, whichever is first.
CANCEL:
The input will stop currently running audio.
Source
Selects which type of audio will be played.
Note: The letter X in this group is filled in with the channel
number currently being edited. The example to the left is
Channel 2 which would make 00X-* in below descriptions
actually be presented as shown. In this instance it is shown as
002-*.
00X-*:
Use any MP3 file beginning with three digits (the last
digit matching the channel number) and a hyphen as the
fourth character in the name.
MIC-00X:
Use MP3 file beginning with the work MIC- and the
following three digits (the last digit matching the channel
number). MIC- is a reserved keyword which the MP3-NODE
automatically assigns new microphone messages.
ALERT-2:
The SFX alert sound assigned to this input.
CUSTOM:
An MP3 selected by browsing the SD memory
card. The name does not need to follow the 00X- naming
convention. Press the > button on the custom filename line to
scroll and find the desired file. After finding the file, press the
Enter button to select and transfer to the channel, or press
Back to return to this edit screen without changing the
filename.
