MP3 Node
Hardware Installation and User Guide
9000-0000-127 Revision 01
18 of 21
Genave Electronics
Config Name
Change config name (MP3-Node.cfg).
Firmware Info
Shows which firmware is installed in the node. Only Genave
can change the firmware.
Factory Reset
Return the settings on the channel to the Factory Default.
Valid range is YES or NO. Factory default is NO.
Individual channels may have their settings restored to the
original factory defaults.
To restore factory defaults for this channel only, use the
left right buttons to select YES, then press the ENTER
button.
The Confirm screen will appear.
Press the ENTER button to proceed and restore Factory
Default Settings to this channel.
Press the BACK button to abort changing back to defaults.
