Installing LTE outdoor CPE
●
Selecting a Location:
LTE Outdoor CPE should be pole-mounted
outdoors and aligned so its antenna faces the nearest LTE eNB.
When selecting a suitable location for the unit, consider these
guidelines:
•
Place LTE Outdoor CPE as high as possible to achieve the best
possible link quality.
•
Place the LTE Outdoor CPE away from power and telephone
lines.
•
Avoid placing LTE Outdoor CPE too close to any metallic
reflective surfaces.
•
Be sure to ground LTE Outdoor CPE with an appropriate
grounding wire (not included) by attaching it to the grounding
screw on the unit and to a good ground connection.
●
Mounting the ODU:
Mount LTE Outdoor CPE on a 1”-4” pole
using the supplied kit, or the optional tilt accessory.
•
Using the clamp
1.
Thread the M10*100mm bolt through a spring washer, flat
washer and the bracket holes.
2.
With the connector facing downward, attaché LTE Outdoor
CPE to a 1”-4” pole.
3.
Attach the bracket to the other side of the pole.
4.
Thread the M10*100mm bolts through both holes on either
side, and tighten the nuts.
