Gemsys TFM 203, Operating Manual

Page: 12 / 20

11
3.5 How to correct the fold position
(see also fine adjustment under 3.3)
If you need to change the fold position this can be done very easily (scale +/-).
1. Paper feeding
2. Select fold type
Wrap fold (DIN A4 document)
For the correct result of the wrap fold you need to adjust two fold positions.
Adjusting the fold pocket A is for the length A.
Adjusting the fold pocket B is for the length B.
To reduce length A
= move the position pointer A to

To increase length A = move the position pointer A to +
To reduce length B = move the position pointer B to

To increase length B = move the position pointer B to +
Z-fold (DIN A4 document)
For the correct result of the Z-fold you need to adjust two fold positions.
Adjusting the fold pocket A is for the length A.
Adjusting the fold pocket B is for the length B.
To reduce length A
= move the position pointer A to

To increase length A = move the position pointer A to +
To reduce length B = move the position pointer B to

To increase length B = move the position pointer B to +